HAI Security, Access Control, Energy Management, Surveillance and Multi Room Audio Kit HAI Home Automation Security, Access Control, Energy Management, Surveillance and Multi Room Audio Kit is a complete security, access and energy management control kit, with surveillance security for residential and commercial applications with the ability to expand. Additional this kit comes complete with Multi Room Audio. The Home Automation Security, Access Control, Energy Management, Surveillance and Multi Room Audio Kit comprises the following: 4 x Motion Sensors (47A001) Features: • 60 lb Pet Immune • High White Light Immunity • 50’ x 50’ Coverage • Quad Element PIR • Wall or Ceiling Mount Included • Long Range Curtain (Optional) • Ultra High White Light Immunity Lens (Optional) • Calibration Free Installation • State-of-the-art wireless PIR • Low current ASIC PIR Technology • Powered by a 3 Volt Lithium battery • Battery life up to 4 years • Built in Automatic Power Saver (APS) • Low Battery condition signal transmission • Test mode for PIR coverage and RF signal 2 x Door Sensors (58A00-1) The 58A00-1 Mini Door/Window Transmitter is a mini sized supervised wireless contact that works with the HAI 45A00-1 Wireless Receiver. http://www.smartautomations.co.uk/home-automations-wireless-quad-immune-motion-detector-p-297.html 1 x HAI OmniPro II Controller (20A00-2) The OmniPro II is HAI's flagship home control and security system. Out of HAI's Omni family of home control systems it has the largest feature set and can control the maximum number of devices. It is designed for large residences and commercial installations. http://www.smartautomations.co.uk/home-automations-home-automation-with-omnipro-controller-p-187.html 1 x Keypad (33A00-1) The Omni Console is a surface mount console with a slim design that can be flush mounted with an optional flush mount backbox (shown below). It features a 48 character cool blue backlight LCD display with menu operation, backlit keys, selectable keyclick, beeper functions and viewing angle. A two-color LED offers status at a glance: red for security armed, green when disarmed. http://www.smartautomations.co.uk/home-automations-omni-console-with-built-speaker-microphone-p-186.html All control, security and programming functions can be accomplished using a Omni Console. It has Silk Screen with the menu options printed on the console face. 1 x Wireless Receiver (45A00-1) 433 MHz for use in domestic and international installations. Allows up to 64 unique wireless security transmitters to report information to a HAI controller. http://www.smartautomations.co.uk/home-automations-wireless-receiver-zone-p-295.html The wireless transmitters replace wired door and window sensors as well as wired motion and glassbreak detectors. Includes Receiver Signal Strength Indicator (RSSI) capability, indicating signal strength of the transmitter as good, fair or poor. That information is stored in the HAI home control system and can be accessed from any HAI console, OmniTouch 5.7 Touchscreen or PC access. 1 x Dealer PC Access (1105W) The software allows the folloing function *Create and maintain system account files *Download an account file to a system *Upload an account file from a system *Print an account file *View and modify configuration of a system *Create, view, and modify lighting and automation programs *View and modify lighting, zone, button, code, and message names *View and modify lighting, zone, button, code, and message voice descriptions *View status of lighting, zones, temperatures, and other system information *Send lighting control, security or mode control, macros (aka buttons), temperature, and message commands to a system *View event log *Obtain live software updates from the Internet 2 x Access Control Card Readers(75A00-1) 125 KHz high security, digitally encrypted, 26-Bit proximity card reader that connects to a serial port on an HAI Home Control System. The reader has durable and scratch resistant polycarbonate housing. Full epoxy potting ensures successful operation even in harsh environments. The reader incorporates an input for a push to exit button and an output for an electric door strike or magnetic lock . It can be mounted to a door frame (mullion) or to any flat wall surface. The two-color LEDs (green and red) and piezo sounder on the reader can be customized to provide individual feedback to the user. Use either a standard credit card sized Access Control Card or the convenient Access Control Key tag to access the system. The Access Control Reader provides a read range up to 4 inches with the HAI access control cards and up to 2 inches with the HAI access control key tags. Each card is attached to a user code in the HAI Omni family controller which can be managed with specific privileges. http://www.smartautomations.co.uk/home-automations-75a001-access-control-card-reader-p-307.html 2 x 12VDC Electronic Door Strikes (79A00-1) When used with Access Control Reader (75A00-1), the Electric Door Strike securely locks and unlocks a door without the need of a key. It allows the door to be locked when closed, but can be automatically unlocked by the system, or manually unlocked with a key. The 12 VDC Electric Door Strike is a Fail-Secure device, which means the door unlocks when power is connected (i.e. the door is locked when power fails). Requires an Ethernet-enabled HAI controller that has firmware version 3.0 or higher. http://www.smartautomations.co.uk/home-automations-79a001-12vdc-electric-door-strike-fail-secure-p-308.html 1 x Power Hub (83A00-1) General purpose 12VDC power supply with battery backup mounted in enclosure. Designed to provide power to several HAI products, including the HAI Access Control Readers with electric or magnetic locks, Omni Consoles, OmniTouch 5.7 Touchscreens, and many other devices. The HAI Power Hub provides battery backed power for connected devices. It has convenient connections and power terminals for a neat installation. It is designed to eliminate unsightly transformers, power strips, external power supplies, battery backup units, and complex wiring normally associated with access control installations. The HAI Power Hub has connections for up to 8 Access Control Readers with electric and magnetic locks. 10 x Access Cards (78A00-1) 125 KHz credit card size 1.7mm thick high security proximity card with fully encrypted format stored on the card. It is thin, flexible, and light enough to be carried in a purse or wallet. It is preprogrammed at the factory with a unique encryption code. It provides a read range up to 4 inches. Requires an Ethernet-enabled HAI controller that has firmware version 3.0 or higher. http://www.smartautomations.co.uk/home-automations-78a001-access-control-card-pack-p-310.html 2x RC-1000WH Thermostat Single stage including Gas, Oil, Steam, Hydronic, Forced Air, Radiant, Electric Single Speed Heat Pumps with auxiliary heat Dual Fuel Heat Pumps Dimensions: 5 1/2" W x 3 5/8" H x 1 1/8" D 4 x Day/Night Cameras (GT-NV40-VF-S) 1 x Camera Server (87A00-1) The HAI Camera Server converts up to 4 analog surveillance camera signals, including HAI’s Indoor Dome Camera (68A01-1) and Day/Night Bullet Camera (68A02-1), to IP video streams. These streams are viewed via the Camera Server's embedded web server or through its output for a camera monitor. The Camera Server has PTZ and audio support. It supports a maximum of 640 x 480 resolution, and its output is in Mjpg format. The HAI Camera Server may be installed stand-alone or with an HAI home control system. Cameras may be viewed at home or over the Internet using a Web browser or Snap-Link (1120). Cameras may be set to be viewed on an HAI IP-based Touchscreen, like the portable OmniTouch 10p Touchscreen (67A00-1) or in-wall OmniTouch 5.7e Touchscreen (53A00-2), using HAI Automation Studio (1126). 1 x Omnitouch 5.7e (53A00-2) The OmniTouch 5.7e Touchscreen provides easy access to to manage the home's lighting, temperatures, A/V equipment, and more. It mounts flush with the wall and features a 5.7 inch color, touch sensitive LCD screen with TFT Technology for brighter colors and better viewing angles. The two-color LED offers status at a glance, and there are selectable keyclick and beeper functions. The OmniTouch 5.7e comes standard with HAI's latest Touchscreen software, called HAI OmniTouch Pro. However, its interface is fully customizable using HAI Automation Studio (1126) software. HAI Automation Studio allows the dealer to develop a more vivid, user-friendly graphic interface based upon the homeowner's lifestyle and interests. Customizations can include adding your dealer logo and contact information or customizing screens to suit each individual room. You may add a floor plan graphic to the Touchscreen interface, and set up buttons that will open specific websites. 1 x Automation Studio (1126) HAI's customizable OmniTouch Touchscreens are IP-based devices that are shipped with HAI's latest Touchscreen software, called HAI OmniTouch Pro. However, Automation Studio gives you complete control of the look, feel, and function of the Touchscreen. A more vivid, user-friendly graphic interface can be developed based on the homeowner's lifestyle and interests through the use of Automation Studio. Customizations can include adding your dealer logo and contact information or customizing screens to suit each individual room. You may add a floor plan graphic to the Touchscreen interface, and set up buttons that will open specific websites. Automation Studio provides a WYSIWYG (What You See Is What You Get) editor that allows you to create Touchscreen pages in a drag-and-drop environment, and see exactly how the page will look without having to first download the design to a Touchscreen. You use Automation Studio's built-in Simulator to test your Touchscreen designs. 1 x PoW Ethernet Switch (FSW-0822) 1 x 4 Zone, 4 Source Multi Room Audio System (62A00-1) 4 x HAI Retractable Cables (62A13-1) 3.5 mm male to 2 RCA male patch cable. Extends to 4 feet. Use to connect TV's, CD players, home theater and stereo components to HI-Fi's RIM. 4 x 6 1/2" In Ceiling Speakers (AC640) With its half bridge wave design, the AC640 looks as good as it sounds. A +/- 3 dB switch allows installers to increase or decrease the output of the tweeter, which comes in handy when you are setting up the room. The larger 6.5 woofer of the AC640 provides fuller low end sound. Applications The AC640 can be used for the following applications 2 channel audio Multi-room audio Home Theater rear channels Pools, spas, hot tubs rooms, etc. Outdoor audio (no extended contact with water) Specifications Woofer: 6.5 (165 mm) Poly Graphite Tweeter: 1 (25 mm) Pivoting Silk with +/- 3 dB switch Recommended Power: 80 Watts Impedance: 8 Ohms Frequency Response: 50 Hz - 20 kHz Sensitivity: 90 dB Cutout Diameter: 7.875 (200 mm) Finish Diameter: 9.125 (232 mm) Finish Depth: 4 (101 mm) Weight: 3.75 lbs (1.70 kgs) http://www.smartautomations.co.uk/destination-audio-ac640-ceiling-speaker-pair-p-335.html £7899ex. VAT For further information, need any products from HAI, Trade pricing or to discuss a system plan, design or installation, please call 0845 642 2434
