The SWA200 subwoofer amplifier is a high current, high efficiency mono block amplifier used to power passive subwoofers.

Applications

The SWA200 amplifier can be used to power passive subwoofers in either two channel or home theater applications. The SWA200 has a built-in crossover that will attenuate higher frequencies not intended for the subwoofer driver. This crossover can be bypassed when the SWA200 is being used with a receiver that has a dedicated subwoofer or LFE output.

The SWA200 comes with a 1 year limited warranty.

Amplifier Type: Discrete Class A/B
Power Output: 200 watts RMS @ 4 ohms
Frequency Response: 20 Hz - 40 kHz +/- 3dB filter off
Crossover Frequency: 40 Hz - 180 Hz (variable)
Crossover Slope: 12 dB / Octave
Dimensions with Rack Ears: 17.75” W x 4” H x 14” D (450mm W x 101mm H x 355mm D)
Dimensions without Rack Ears: 19” W x 4” H x 14” D (482mm W x 101mm H x 355mm D)
Weight: 17 lbs (7.71 kgs)

---

The SW8 In-wall Subwoofer is a sleek and non-obtrusive powerful sub woofer that will add depth and dimension to your music and movies. When powered by the Destination Audio SWA200 Subwoofer Amplifier, the SW8 In-wall Subwoofer delivers deep, clear bass that will elevate your home theater and music listening experience. The in-wall design frees up floor space.

Applications


The SW8 In-wall Subwoofer can be used for the following applications:

- 2 channel audio
- Multi-room audio
- Home theater

The SW8 In-wall Subwoofer comes with a 5 year warranty on the cabinet and driver and a 1 year warranty on the power amplifier.

Woofer: Dual 8” (203 mm) Poly Graphite
Power Handling: 50-200 Watts
Sensitivity:90 dB
Frequency Response:35 Hz - 180 Hz
Crossover Frequency: 100 Hz (low pass on)
Filter Slope: 12 dB / Octave
Impedance: 8 Ohms (each driver)
Cut Out Dimensions: 9” W x 17.5” H(229 mm W x 446 mm H)

This Package has
1 x SW8 In-wall Subwoofer and
1 x SWA-200 Amplifier

£608.69 ex VAT

For further information or to discuss a system plan, lighting design or installation, please call 0845 642 2434